Analysis of comb-gnawing behavior in Apis cerana cerana (Hymenoptera: Apidae).

Apis cerana cerana exhibits a prominent biological trait known as comb gnawing. In this study, gnawed combs from colonies during different seasons were collected, investigating the comb age and locations of gnawing. Patterns of comb gnawing were recorded, and the effects of 2 factors, namely, comb type and season, on the mass of wax residues and the gnawed surface area were measured. The results revealed that A. c. cerana predominantly gnaws combs that have been used for over 6 months, with gnawing concentrated in the brood-rearing area. In the first 3 seasons, significantly higher masses of wax residues and larger gnawed surface areas were found in greater wax moth larvae (GWML)-infested combs compared to newly built and old combs. Also, there were significantly higher masses and areas gnawed by A. c. cerana in old combs compared to newly built combs in all 4 seasons. Compared to other seasons, it exhibited significantly higher masses and areas resulting from comb-gnawing in newly built or old combs in winter. However, there were no significant differences in the masses of wax residues and surface areas gnawed in GWML-infested combs across the first 3 seasons. In conclusion, this study documented the impact of comb type and season on the comb-gnawing behavior of A. c. cerana, contributing to beekeeping management practices and the current understanding of bee biology.

Impact of Brood Cell Cocoons on Metal Accumulation and CYP450 Detoxification Gene Expression in Apis cerana cerana.

Honey bees play a critical role as pollinators. However, their reproduction success and survival face severe threats due to the deterioration of their living environment. Notably, environmental conditions during their preimaginal stage inside brood cells can influence their immune capabilities and overall health after emergence. During the in-cell developmental stage, workers are in close contact with cocoons, which can become a source of stress due to accumulated metals. To investigate this potential threat, experiments were conducted to examine the impact of cocoons in brood cells used to rear different generations on the metal content and detoxification gene expression levels in Apis cerana cerana. Our findings indicated significant differences in the layers, weight, base thickness, and metal contents like Cr, Cd, Pb, Mn, Ni, and As of cocoons in multi-generation brood cells compared to single-generation brood cells. These increases led to significant elevations in metal levels and upregulations of the four CYP450 detoxification genes in both six-day-old larvae and newly emerged workers. In conclusion, this study highlights the negative impact of cocoons in multi-generation brood cells on bee health and provides evidence supporting the development of rational apiculture management strategies for ecosystem stability.

[Sinomenine ameliorates bleomycin A5-induced pulmonary fibrosis by blocking the miR-21/ADAMTS-1 signaling pathway in rats].

Objective To explore the impact of sinomenine on bleomycin A5-induced pulmonary fibrosis (PF) in rats and the underlying mechanism. Methods MRC-5 cells were cultured and treated with sinomenine to determine its optimal concentration and time through the MTT assay. Subsequently, MRC-5 cells were incubated with 80 µmol/L sinomenine for 48 hours or transfected with miR-21 mimic/a disintegrin-like and metalloproteinase with thrombospondin type 1 motif (ADAMTS-1) siRNA prior to sinomenine treatment. The expression of miR-21, ADAMTS-1, collagen type 1 (Col1) and collagen type 3 (Col3) was detected by quantitative real-time PCR (qRT-PCR) and/or Western blot analysis. Thirty SD rats were randomly divided into control group, sinomenine group and sinomenine combined with miR-21 agomir group, with 10 animals in each group. Bleomycin A5 were intratracheally administered to establish the PF model. Then, rats in control group, sinomenine group and sinomenine +miR-21 agomir group were treated with 9 g/L sodium chloride solution, sinomenine and sinomenine+miR-21 agomir, respectively. On day 28, all rats were sacrificed. HE and Masson staining was performed in pulmonary tissue. The expression of ADAMTS-1, Col1 and Col3 in pulmonary tissue were detected by qRT-PCR and/or Western blot analysis. ELISA was used to measure serum procollagen type 1 carboxyterminal propeptide (P1CP) and procollagen type 3 aminoterminal propeptide (P3NP) levels. Results Administration of sinomenine decreased miR-21 levels, up-regulated ADAMTS-1 expression, and promoted Col1 and Col3 degradation in MRC-5 cells. Importantly, interfering with the miR-21/ADAMTS-1 signaling pathway partially reversed the promotive effect of sinomenine on Col1 and Col3 degradation. Treatment of SD rats with sinomenine reduced alveolitis and PF scores, decreased serum P1CP and P3NP levels, up-regulated pulmonary ADAMTS-1 expression, and down-regulated Col1 and Col3 expression. However, these effects were reversed by miR-21 agomir. Conclusion Sinomenine promotes Col1 and Col3 degradation and inhibits PF in rats by miR-21/ADAMTS-1 pathway.

Investigation of underlying links between nitrogen transformation and microorganisms' network modularity in the novel static aerobic composting of dairy manure by "stepwise verification interaction analysis".

Conventional composting is a viable method treating agricultural solid waste, and microorganisms and nitrogen transformation are the two major components of this proces. Unfortunately, conventional composting is time-consuming and laborious, and limited efforts have been made to mitigate these problems. Herein, a novel static aerobic composting technology (NSACT) was developed and employed for the composting of cow manure and rice straw mixtures. During the composting process, physicochemical parameters were analyzed to evaluate the quality of compost products, and microbial abundance dynamics were determined using high-throughput sequencing technique. The results showed that NSACT achieved compost maturity within 17 days as the thermophilic stage (≥55 °C) lasted for 11 days. GI, pH, and C/N were 98.71 %, 8.38, and 19.67 in the top layer, 92.32 %, 8.24, and 22.38 in the middle layer, 102.08 %, 8.33, and 19.95 in the bottom layer. These observations indicate compost products maturated and met the requirements of current legislation. Compared with fungi, bacterial communities dominated NSACT composting system. Based on the stepwise verification interaction analysis (SVIA), the novel combination utilization of multiple statistical analyses (Spearman, RDA/CCA, Network modularity, and Path analyses), bacterial genera Norank Anaerolineaceae (-0.9279*), norank Gemmatimonadetes (1.1959*), norank Acidobacteria (0.6137**) and unclassified Proteobacteria (-0.7998*), and fungi genera Myriococcum thermophilum (-0.0445), unclassified Sordariales (-0.0828*), unclassified Lasiosphaeriaceae (-0.4174**), and Coprinopsis calospora (-0.3453*) were the identified key microbial taxa affecting NH4+-N, NO3--N, TKN and C/N transformation in the NSACT composting matrix respectively. This work revealed that NSACT successfully managed cow manure-rice straw wastes and significantly shorten the composting period. Interestingly, most microorganisms observed in this composting matrix acted in a synergistic manner, promoting nitrogen transformation.

Case Study on Prestressed CFRP Plates Applied for Strengthening Hollow-Section Beam Removed from an Old Bridge.

With the wide application of carbon fiber reinforced polymer (CFRP) plate, used for strengthening existed concrete structures, the prestressing technology of CFRP plate is becoming a hot topic, in order to sufficiently develop its high-strength peculiarity. In this paper, a full-scale hollow-section beam with length of 16 m taken from an old bridge which was in service for about 20 years was first examined for existed cracks and repaired by filling epoxy adhesive, and then the beam was strengthened with prestressed CFRP plates. The CFRP plates were tensioned and fixed with flat-plate anchorages at ends and bonded with adhesive on the bottom surface of the beam. The strengthened beam was experimentally studied using a four-point test to measure the concrete strain along the height of the mid-span section and the mid-span deflection. The finite element model of the strengthened beam was verified by the comparison of test results and used for an extending study of parametric analysis considering the effect of the length and amount of CFRP plates. Results indicated that with an increase in the length and amount of CFRP plates, the mid-span deflection of the beam decreases with the increased cracking resistance and bearing capacity, while the ultimate failure mode transfers from the under-reinforcement to the over-reinforcement.

Comb Cell Structure and Morphological Characteristics of the Chinese Honey Bee, Apis cerana cerana (Hymenoptera: Apidae), Under Successive Generations.

This study investigated the changes in comb cell structure and external morphological characteristics of the Chinese honey bee under ten successive generations to determine the optimal time to replace the old combs. Accordingly, ten Chinese honey bee experimental colonies were established, and natural combs were constructed for continuous rearing of workers for 1-10 generations. The brood comb thickness, brood cell structure, birth weight, and morphological characteristics of workers were determined. Pearson correlation analyses between brood comb structure and morphological characteristics of workers were carried out. The results revealed that under ten successive generations, the color of the brood comb deepens from white or light yellow to brown and finally to black. Also, concerning the brood cell shape, the cell base changes from the three-rhomboid structure to the hemisphere, and the cell body changes from the hexagonal prism structure to the cylinder. The brood cell depth increases with an increase in brood comb thickness. The cell volume reduces with the hexagonal cell's decreasing inner circumference side length, and diameter. A smaller cell volume leads to a decrease in the birth weight and body size of the worker, in addition, the Chinese honey bee has gnawed off the comb cells that have been cultivated for eight generations. This study suggests that the combs of Chinese honey bees should be replaced after eight generations to improve colony strength and production performance.

Effective Control Method Based on Trajectory Optimization for Three-Link Vertical Underactuated Manipulators With Only One Active Joint.

For a three-link vertical underactuated manipulator (TVUM) with only one active joint, the control target is to swing up its endpoint from the straight-down equilibrium point (SDEP) and to stabilize the endpoint at the straight-up equilibrium point (SUEP) eventually. Up to now, there are few effective control strategies to achieve the above control target. In this article, we propose an effective control method based on the trajectory optimization to realize the system control target, and the main steps of this article are: 1) a continuous trajectory that consists of two segments with design parameters is planned for the actuated link, along which the actuated link can be swung up from the initial states to the final states; 2) the design parameters are optimized by using the intelligent optimization algorithm to guarantee that the states of the underactuated links are continuous at the junction. In this way, the underactuated links are also moved to their final states with the actuated link simultaneously; 3) a tracking controller is designed by using the sliding-mode method to track the trajectory with optimized design parameters, so the endpoint is swung up from the SDEP to the SUEP directly; and 4) a stabilizing controller is further devised through the LQR method to keep the endpoint being stable at the SUEP. Finally, simulation results show that the proposed control method achieves the swing-up and stable control target of the system, and the control performance of the proposed method is superior than that of the existing control methods through the comparisons.

The co-occurrence network patterns and keystone species of microbial communities in cattle manure-corn straw composting.

Microbes often form complex ecological networks in various habitats. Co-occurrence network analysis allows exploring the complex community interactions beyond the community diversities. This study explores the interspecific relationships within and between bacterial and fungal communities during composting of cow manure using co-occurrence network analysis. Furthermore, the keystone taxa that potentially exert a considerable impact on the microbiome were revealed by network analysis. The networks in the present study harbored more positive links. Specifically, the interactions/coupling within bacterial communities was tighter and the response to changes in external environmental conditions was more quickly during the composting process, while the fungal network had a better buffer capacity for changes in external environmental conditions. Interestingly, this result was authenticated in the bacterial-fungal (BF) network and the Mantel test of major modules and environmental variables. More than that, the Zi-Pi plot revealed that the keystone taxa including "module hubs" and "connectors" were all detected in these networks, which could prevent the dissociation of modules and networks.

[Phylogenetic and pathogenicity analysis of influenza B virus strain B/Guangxi-Jiangzhou/1352/2018].

Influenza B virus (IBV) is more likely to cause complications than influenza A virus (IAV) and even causes higher disease burden than IAV in a certain season, but IBV has received less attention. In order to analyze the genetic evolution characteristics of the clinical strain IBV (B/Guangxi-Jiangzhou/1352/2018), we constructed genetic evolution trees and analyzed the homology and different amino acids of hemagglutinin and neuraminidase referring to the vaccine strains recommended by World Health Organization (WHO). We found that strain B/Guangxi-Jiangzhou/1352/2018 was free of interlineage reassortment and poorly matched with the vaccine strain B/Colorado/06/2017 of the same year. We also determined the median lethal dose (LD50) and the pathogenicity of strain B/Guangxi-Jiangzhou/1352/2018 in mice. The results showed that the LD50 was 105.9 TCID50 (median tissue culture infective dose), the IBV titer in the lungs reached peak 1 d post infection and the mRNA level of the most of inflammatory cytokines in the lungs reached peak 12 h post infection. The alveoli in the lungs were severely damaged and a large number of inflammatory cells were infiltrated post infection. The study demonstrated that the clinical strain IBV (B/Guangxi-Jiangzhou/1352/2018) could infect mice and induce typical lung inflammation. This will facilitate the research on the pathogenesis and transmission mechanism of IBV, and provide an ideal animal model for evaluation of new vaccines, antiviral and anti-inflammatory drug.

Cell orientation characteristics of the natural combs of honey bee colonies.

The cell orientation characteristics of the natural combs of honey bees have received much research attention. Although natural combs have been shown to be composed of cells with three orientations-vertical, intermediate (oblique), and horizontal-the proportion of comb cells in these three orientations varies. Knowledge of the comb-building preferences of honey bees is essential for the installation of wax comb foundations, and clarification of the cell orientation characteristics of natural honey bee combs is important for beekeeping. The purpose of this study was to determine the cell orientation characteristics of natural combs of Eastern honey bees (Apis cerana cerana) and Western honey bees (Apis mellifera ligustica). Newly built combs were used to measure the orientation of hexagonal cells and calculate the proportion of cells in different orientations relative to the total number of cells. The number of eggs laid by queens in the cells of different orientations was also determined. The orientation of cells in the natural combs of Eastern and Western honey bees was determined based on the value of the minimum included angle between the pair of parallel cell walls and a vertical line connecting the top and bottom bars of the movable frame in the geometric plane of the comb: 0°≤θ≤10°, 10°<θ≤20°, and 20°<θ≤30° for vertical, intermediate, and horizontal orientations, respectively. Natural combs were composed of cells with at least one orientation (vertical or horizontal), two orientations (vertical + intermediate (oblique) or vertical + horizontal), or three orientations (vertical + intermediate + horizontal), and the proportions of combs with the three aforementioned configurations differed. Both Eastern honey bees and Western honey bees preferred building combs with cells in a vertical orientation. Queens showed no clear preference for laying eggs in cells of specific orientations. The results of this study provide new insight that could aid the production and cutting of wax comb foundations of Eastern and Western honey bees. Our study highlights the importance of installing wax comb foundations compatible with the comb-building preferences of bees.

Tip Position Control and Vibration Suppression of a Planar Two-Link Rigid-Flexible Underactuated Manipulator.

When a flexible link manipulator lacks a joint motor, how to use the remaining motors to achieve the control objective is a challenge, and the research in this direction is limited. This article presents a tip position control and vibration suppression approach for a planar two-link rigid-flexible (TLRF) underactuated manipulator with a passive first joint. First, we establish a dynamic model of the system by using the assumed mode method (AMM) and the Lagrangian modeling method. Then, we obtain the dynamic coupling relationship of the two links based on the dynamic model. According to this dynamic coupling relationship, we find that the passive rigid link can be controlled indirectly by controlling the active flexible link. Thus, we calculate the target angles of the two links by using the inverse kinematic method and design a controller for the active flexible link to stabilize it at its target angle and to suppress its vibration. Next, we optimize the parameters of this controller by using the genetic algorithm (GA). GA helps us simultaneously stabilize the passive rigid link at its target angle while realizing the control objective of the active flexible link. The simulation results demonstrate the effectiveness of the proposed control approach.

Motion Planning and Adaptive Neural Tracking Control of an Uncertain Two-Link Rigid-Flexible Manipulator With Vibration Amplitude Constraint.

This article deals with an uncertain two-link rigid-flexible manipulator with vibration amplitude constraint, intending to achieve its position control via motion planning and adaptive tracking approach. In motion planning, the motion trajectories for the two links of the manipulator are planned based on virtual damping and online trajectories correction techniques. The planned trajectories can not only guarantee that the two links can reach their desired angles, but also have the ability to suppress vibration, which can be adjusted to meet the vibration amplitude constraint by limiting the parameters of the planned trajectories. Then, the adaptive tracking controller is designed using the radial basis function neural network and the sliding mode control technique. The developed controller makes the two links of the manipulator track the planned trajectories under the uncertainties including unmodeled dynamics, parameter perturbations, and persistent external disturbances acting on the joint motors. The simulation results verify the effectiveness of the proposed control strategy and also demonstrate the superior performance of the motion planning and the tracking controller.

Early-Age Mechanical Characteristics and Microstructure of Concrete Containing Mineral Admixtures under the Environment of Low Humidity and Large Temperature Variation.

The application of concrete containing mineral admixtures was attempted in Northwest China in this study, where the environment has the characteristics of low humidity and large temperature variation. The harsh environment was simulated by using an environmental chamber in the laboratory and four types of concrete were prepared, including ordinary concrete and three kinds of mineral admixture concretes with different contents of fly ash and blast-furnace slag. These concretes were cured in the environmental chamber according to the real curing conditions during construction. The compression strength, fracture properties, SEM images, air-void characteristics, and X-ray diffraction features were researched at the early ages of curing before 28 d. The results showed that the addition of fly ash and slag can improve the compression strength and fracture properties of concrete in the environment of low humidity and large temperature variation. The optimal mixing of mineral admixture was 10% fly ash and 20% slag by replacing the cement in concrete, which can improve the compression strength, initial fracture toughness, unstable fracture toughness, and fracture energy by 23.9%, 25.2%, 45.3%, and 22.6%, respectively, compared to ordinary concrete. Through the analysis of the microstructure of concrete, the addition of fly ash and slag can weaken the negative effects of the harsh environment of low humidity and large temperature variation on concrete microstructure and cement hydration.

Neural Correlates of Attentional Modulation of Prepulse Inhibition.

Prepulse inhibition (PPI) refers to the suppression of the startle reflex when the intense startling stimulus is shortly (20-500 ms) preceded by a weak non-startling stimulus (prepulse). Although the main neural correlates of PPI lie in the brainstem, previous research has revealed that PPI can be top-down modulated by attention. However, in the previous attend-to-prepulse PPI paradigm, only continuous prepulse but not discrete prepulse (20 ms) could elicit attentional modulation of PPI. Also, the relationship between the attentional enhancement of PPI and the changes in early cortical representations of prepulse signals is unclear. This study develops a novel attend-to-prepulse PPI task, when the discrete prepulse is set at 150 ms at a lead interval of 270 ms, and reveals that the PPI with attended prepulse is larger than the PPI with ignored prepulse. In addition, the early cortical representations (N1/P2 complex) of the prepulse show dissociation between the attended and ignored prepulse. N1 component is enhanced by directed attention, and the attentional increase of the N1 component is positively correlated with the attentional enhancement of PPI, whereas the P2 component is not affected by attentional modulation. Thus, directed attention to the prepulse can enhance both PPI and the early cortical representation of the prepulse signal (N1).

Attribute capture underlying the precedence effect in rats.

In a reverberant environment, humans with normal hearing can perceptually fuse the soundwave from a source with its reflections off nearby surfaces into a single auditory image, whose location appears to be around the source. This phenomenon is called the precedence effect, which is based on the perceptual capture of the reflected (lagging) sounds' attributes by the direct wave from the source. Using the paradigm of attentional modulation of the prepulse inhibition (PPI) of the startle reflex, with both the prepulse-feature specificity and the perceived-prepulse-location specificity, this study was to examine whether the perceptual attribute capture underlying the precedence effect occurs in rats. One broadband continuous noise was delivered by each of two spatially separated left and right loudspeakers with a 1-ms inter-loudspeaker delay. A silent gap was embedded in one of the two noises as the prepulse stimulus. The results showed that regardless of whether the gap was physically in the leading or lagging noise when the leading noise was either the left or right one, fear conditioning the gap enhanced PPI only when the leading noise was delivered from the loudspeaker that was the leading but not the lagging loudspeaker during the conditioning, indicating that due to the spatial specificity (either left or right) in the attentional enhancement of PPI, the perceived location of the conditioned gap was always on the leading side even though the gap was physically on the lagging side. Thus, rats have the same perceptual ability of attribute capture, thereby experiencing the auditory precedence effect as humans.

The expression pattern of ACTBL2 in thymoma reveals its potential therapeutic target efficacy.

PURPOSE: Thymoma is a thymic epithelial tumor characterized by the presence of epithelial cells and lymphocytes in the thymus. Although the incidence of thymoma is not high, we know very little about its treatment mechanism. Therefore, this study was intended to explore its potential targets and provide a new approach for perfect targeted therapy. METHODS: We identified a series of non-coding (nc) RNAs (including BCL11A, miR-3977, miR-4460 and miR-542-3p) and TF (FAM185A, MGAM2, SEC14L4, ACTBL2), and predicted transcription factors (including AHR, ATF4, CEBPA and DDIT3) that have significant regulatory effects on the module by difference analysis, co-expression analysis, enrichment analysis of thymoma gene expression profiling and using hypergeometric test to calculate the potential regulatory effects of multiple factors on the module. RESULTS: We obtained 15 modules from the thymoma dysfunction modules and found that the module genes are involved in a variety of immune-related biological functions. For example, neutrophil activation involved in immune response, neutrophil mediated immunity and response to extracellular stimulus indicate that neutrophil-mediated regulation plays an important regulatory role in the thymoma disorder module. CONCLUSION: Overall, a dysfunction module for thymoma was identified, and significant pivotal regulators in the module were used as important components of thymoma molecular dysregulation, of which ACTBL2 could serve as a potential therapeutic target in thymoma, which provides an effective theoretical reference for subsequent researchers.

Spatial specificity in attentional modulation of prepulse inhibition of the startle reflex in rats.

Prepulse inhibition (PPI), the suppression of the startle reflex when the startling stimulus is shortly preceded by a weaker non-startling sensory stimulus (prepulse), can be enhanced by selective attention to the prepulse with a marked prepulse-feature specificity. To determine if the attentional modulation of PPI in rats can also be perceptual location specific, this study investigated whether fear-conditioning of a prepulse perceived at a location can enhance PPI only when the conditioned prepulse is perceived at that conditioned location. A continuous narrowband noise (NBN) was delivered by each of the two spatially separated loudspeakers in the frontal azimuth with a silent gap embedded in each NBN. The inter-loudspeaker interval was 1 ms (either left or right loudspeaker leading). Due to the precedence effect, both the NBN and gap images were perceived at the leading loudspeaker. The perceptually fused gap was used as the prepulse. To fear-condition one gap prepulse, which was perceived at one loudspeaker, the prepulse was paired with footshock in a temporally precise manner and the other gap (the conditioning-control prepulse) perceived at the other (opposite) loudspeaker was paired with footshock in a random manner. Compared to PPI before conditioning, PPI induced by the fear-conditioned gap perceived at the fear-conditioned loudspeaker, but not that by the conditioning-control gap, was significantly enhanced. Thus, attentional modulation of PPI can be not only prepulse-feature specific, but also perceptual location specific, and involves combined central processes for content and location information.

Climate change-induced migration patterns and extinction risks of Theaceae species in China.

Theaceae, an economically important angiosperm family, is widely distributed in tropical and subtropical forests in Asia. In China, Theaceae has particularly high abundances and endemism, comprising ~75% of the total genera and ~46% of the total species worldwide. Therefore, predicting the response of Theaceae species to climate change is vital. In this study, we collected distribution data for 200 wild Theaceae species in China, and predicted their distribution patterns under current and future climactic conditions by species distribution modeling (SDM). We revealed that Theaceae species richness is highest in southeastern China and on Hainan Island, reaching its highest value (137 species) in Fujian Province. According to the IUCN Red List criteria for assessing species threat levels under two dispersal assumptions (no dispersal and full dispersal), we evaluated the conservation status of all Theaceae species by calculating loss of suitable habitat under future climate scenarios. We predicted that nine additional species will become threatened due to climate change in the future; one species will be classified as critically endangered (CR), two as endangered (EN), and six as vulnerable (VU). Given their extinction risks associated with climate change, we recommended that these species be added to the Red List. Our investigation of migration patterns revealed regional differences in the number of emigrant, immigrant, and persistent species, indicating the need for targeted conservation strategies. Regions containing numerous emigrants are concentrated in Northern Taiwan and coastal regions of Zhejiang and Fujian provinces, while regions containing numerous immigrants include central Sichuan Province, the southeastern Tibet Autonomous Region, southwest Yunnan Province, northwest Sichuan Province, and the junction of Guangxi and Hunan provinces. Lastly, regions containing persistent species are widely distributed in southern China. Importantly, regions with high species turnover are located on the northern border of the entire Theaceae species distribution ranges owing to upwards migration; these regions are considered most sensitive to climate change and conservation planning should therefore be prioritized here. This study will contribute valuable information for reducing the negative impacts of climate change on Theaceae species, which will ultimately improve biodiversity conservation efficiency.

The OpenFlexure Block Stage: sub-100 nm fibre alignment with a monolithic plastic flexure stage.

As 3D printers become more widely available, researchers are able to rapidly produce components that may have previously taken weeks to have machined. The resulting plastic components, having high surface roughness, are often not suitable for high-precision optomechanics. However, by playing to the strengths of 3D printing-namely the ability to print complex internal geometries-it is possible to design monolithic mechanisms that do not rely on tight integration of high-precision parts. Here we present a motorised monolithic 3D-printed plastic flexure stage with sub-100 nm resolution that can perform automated optical fibre alignment.

Microbial community composition, co-occurrence network pattern and nitrogen transformation genera response to biochar addition in cattle manure-maize straw composting.

A better understanding of the microbial group influencing nitrogen (N) dynamics and cycling in composting matrix is critical in achieving good management to alleviate N loss and improve final compost quality. This study investigated the bacterial composition, structure, co-occurrence network patterns and topological roles of N transformation in cattle manure-maize straw composting using high-throughput sequencing. The two treatments used in this experiment were cattle manure and maize straw mixture (CM) and CM with 10% biochar addition (CMB). In both treatments, the bacterial community composition varied during composting and the major phyla included Actinobacteria, Firmicutes, Proteobacteria, Bacteroidetes and Chloroflexi. The phyla Actinobacteria and Proteobacteria were more abundant in CMB treatment while Firmicutes was abundant in CM piles. The metabolic functional profiles of bacteria was predicted using the "phylogenetic investigation of communities by reconstruction of unobserved states" (PICRUSt) which revealed that except for cellular processes pathway, CMB had slight higher abundance in metabolism, genetic information processing and environmental information processing than the CM. Pearson correlation revealed more significant relationship between the important bacteria communities and N transformation in CMB piles compared with CM. Furthermore, network pattern analysis revealed that the bacterial networks in biochar amended piles are more complex and harbored more positive links than that of no biochar piles. Corresponding agreement of multivariate analyses (correlation heatmap, stepwise regression, Path and network analyses) revealed that Psychrobacter, Thermopolyspora and Thermobifida in CM while Corynebacterium_1, Thermomonospora and Streptomyces in CMB were key bacterial genera affecting NH4+-N, NO3--N and total nitrogen (TN) transformation respectively during composting process. These results provide insight into nitrogen transformation and co-occurrence patterns mediating microbes and bacterial metabolism which could be useful in enhancing compost quality and mitigating N loss during composting.